By Matt Collins Junior
Making homemade solar panels isn’t as difficult as you may think and building them yourself can save you hundreds or even thousands of dollars over purchasing panels which are already assembled. There are several different alternatives when it comes to making your own, you are able to build them over completely from scratch using free information off of the internet, and there are also many great internet sites that have DIY kits, which we will talk briefly about.
There are some basic components to homemade solar panels. You need the Polycrystalline Solar cells themselves, which you can find from various outlets, the lowest priced you are going to find them is on eBay, or some other online source like Amazon. Then there is the frame work, power inverter and storage batteries. Depending on your individual needs, you are going to require two to five panels to supply the minimum power for a regular home. You can buy various sizes of cells, but just to save time soldering them together, you should try to find 3″x6″ mono-crystalline cells, and you will need 36 of these for a standard panel. Each cell is going to put out about half a volt, so you will be putting out around 18 volts per panel. You need to be extremely careful when handling these cells, because while they are powerful, they are fragile.
Then you are going to need the platform for your panel. You will require a sheet of plywood, at least inch thick and some 1″x1″ boards,three to four per panel. Then you are going to need some pegboard to fit into the wells of the shape, where you are going to glue the solar cells to. You must also buy sheets of plexiglass to cover the whole thing, so as to protect the cells from the weather and debris.
You are going to need to solder the cells together in a sequence, then solder each sequence to find the desired output. It is a great idea to purchase a voltage meter, and when you’ve got them all together, take them out in the sun and check the ends to make sure you did it right.
Then you need to mount the sections into the frame, and cover it with the Plexiglass. Until they are safe in the frame, you absolutely need to be careful when dealing with the cell panels themselves.
Then when every-thing is done and tested, you can decide on where to place the homemade solar panels to supply the power. It is ideal to place them somewhere that gets at least 8-10 hours of sunlight, many people put them on their roof. If you want to get really fancy you can buy brackets and electric motors that tilt the panels towards the sun no matter what part of the day it is.
While this may still appear complex, it really isn’t. This is simply a relatively basic overview of the procedure. Mentioned above previously, there are many resources to do generate this extremely easily. There are free internet sites that can take you step-by-step through the process, but this is usually after you have all the materials. While Do it yourself kits cost some money, they make it easy by supplying step by step instructions, listing of tools and materials you will need, as well as where to buy your supplies. You possibly can make homemade solar panels, and it is easier than you think.
About the Author: Matt Collins Junior invite you Save huge money on your energy bills by reading this
Earth4energy Review
, before purchasing any Home Made Energy Solar Panel or
build your own solar panel
.Comprehensive report and customer reviews of popular renewable energy solutions online
Source:
isnare.com
Permanent Link:
isnare.com/?aid=564671&ca=Home+Management